Free-hand

electomechanical hand

Designer: -
Research team: -
Partner: D.RE.A.M. FabLab

An electromechanical hand and forearm prosthesis designed for individuals with transradial amputations or congenital agenesis/malformations of the upper limb. The primary goal is to democratize access to myoelectric prostheses: by leveraging digital manufacturing, computational design, and open hardware platforms, the system reduces the conventional costs of advanced prostheses—which often run into the tens of thousands of euros—to an estimated target price of approximately 700 euros, making the technology accessible and customizable to each user’s anthropometric measurements.

AUXETIC STRUCTURES

The project stems from the philosophy of open design and the maker movement, drawing heavily on global digital fabrication communities (such as e-NABLE and the Open Bionics projects) and the principles of distributed co-design. The inspiration stems from the clinical and social need to bridge the economic gap in access to myoelectric devices, transforming the patient from a mere passive user into a co-creator in the process of customizing, aesthetically refining, and ergonomically adapting their own assistive device.

D.re.a.m. - Design and research in advanced manufacturing -fab lab

The technological workflow integrates reverse engineering, parametric modeling, open-source electronics, and additive manufacturing:

  • 3D Scanning and Modeling: optical acquisition of the stump/residual limb using a 3D scanner to generate a custom-fit socket and model the kinematics of the fingers and palm in a 3D CAD environment.
  • Myoelectric Control (EMG): a circuit for acquiring and processing muscle biopotentials using surface electrodes (sEMG) placed in contact with the skin of the residual forearm.
  • Actuation and Electronics: a microcontroller (compatible with Arduino architecture or open-source embedded microcontrollers) that decodes muscle contraction patterns and controls servomotors dedicated to pulling cables/tendons to open and close the fingers.
  • 3D Printing (FDM/FFF): fabrication of the entire exoskeleton and structural mechanical components using thermoplastic polymers (PLA, ABS, PETG, or filled technical filaments), ensuring rapid reproducibility and replacement parts at virtually no cost.

results

The project has successfully demonstrated the full feasibility of an advanced, fully functional myoelectric prosthesis with a production cost of just 700 euros, radically reducing the economic barriers typical of commercial devices. By integrating 3D scanning with parametric modeling, the system ensures a perfect anatomical fit of the socket and full scalability of the hand’s proportions based on each patient’s specific characteristics. Finally, the open and digital nature of the entire process has validated a distributed co-design pipeline: the prosthesis can be manufactured, repaired, and customized directly within any FabLab or digital fabrication center worldwide, eliminating the reliance on expensive, proprietary industrial molds.

more projects